View LH2040-PF_2009171.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LH2040-PF doc. no : qw0905- rev. : date : 08 - aug. - 2005 a data sheet LH2040-PF round type led lamps ligitek electronics co.,ltd. property of ligitek only lead-free parts pb l dcc
note : 1.all dimension are in millimeter tolerance is ? 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. ligitek electronics co.,ltd. property of ligitek only directivity radiation package dimensions part no. LH2040-PF page 1/5 25% 75% 100% 0 25% 50% -60 x 100% 75% 50% 60 x 0 x -30 x 30 x 3.0 4.0 5.2 1.5max 4.2 2.54typ 0.5 typ 1.0min 25.0min + -
-40 ~ +100 tstg storage temperature forward voltage @20ma(v) luminous intensity @10ma(mcd) spectral halfwidth ??f nm viewing angle 2 c 1/2 (deg) material peak wave length f pnm part no note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. gap LH2040-PF 4.5 typ. 697 red red diffused 3.0 2.6 1.7 90 emitted lens min. max. min. 36 soldering temperature typical electrical & optical characteristics (ta=25 j ) color tsol max 260 j for 5 sec max (2mm from body) j page 2/5 part no. reverse current @5v operating temperature peak forward current duty 1/10@10khz absolute maximum ratings at ta=25 j forward current power dissipation parameter 15 ma i f t opr ir -40 ~ +85 10 pd i fp 40 60 j g a ma mw symbol h ratings unit ligitek electronics co.,ltd. property of ligitek only LH2040-PF
1.5 relative intensity@20ma normalize @25 j forward voltage@20ma normalize @25 j ambient temperature( j ) 1000 900 800 700 600 wavelength (nm) fig.5 relative intensity vs. wavelength ambient temperature( j ) relative intensity@20ma 0.0 0.5 1.0 0.8 -40 0.9 -20 0 20 40 60 80 100 -40 0.0 1.0 0.5 -20 80 40 20 060100 ligitek electronics co.,ltd. property of ligitek only fig.2 relative intensity vs. forward current forward current(ma) fig.4 relative intensity vs. temperature forward voltage(v) fig.3 forward voltage vs. temperature 1.1 1.0 1.2 forward current(ma) 0.1 1.0 1.0 100 10 1000 2.0 3.0 2.0 3.0 2.5 relative intensity normalize @20ma 4.0 5.0 1.0 0.0 0.5 1.0 2.0 1.5 3.0 2.5 typical electro-optical characteristics curve fig.1 forward current vs. forward voltage h chip part no. 10 100 1000 page 3/5 LH2040-PF
ligitek electronics co.,ltd. property of ligitek only part no. page 4/5 LH2040-PF dip soldering preheat: 120c max preheat time: 60seconds max ramp-up 3 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260c max dipping time:3 seconds max distance:2mm min(from solder joint to case) 60 seconds max 25x preheat 3/sec max time(sec) 260x 120x temp(c) 5 /sec max 260 c3sec max soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time) distance:2mm min(from solder joint to case) 2.wave soldering profile
this test intended to see soldering well performed or not. the purpose of this test is the resistance of the device under tropical for hous. this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. this test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. the purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. ligitek electronics co.,ltd. property of ligitek only 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles solderability test solder resistance test 1.t.sol=230 j? 5 j 2.dwell time=5 ? 1sec 1.t.sol=260 j? 5 j 2.dwell time= 10 ? 1sec. high temperature high humidity test thermal shock test low temperature storage test 1.ta=65 j? 5 j 2.rh=90 %~95% 3.t=240hrs ? 2hrs 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) operating life test high temperature storage test 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) test condition test item description reliability test: part no. mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202:103b jis c 7021: b-11 jis c 7021: b-12 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 mil-std-883:1008 jis c 7021: b-10 reference standard 5/5 page LH2040-PF
w l h i t e m n o . q ' t y : p c s n , w , : k g s g , w , : k g s 3. 12 inner boxes / carton size : l x w x h 58.5cm x 34cm x 34cm l c/no: made in china w h 2. 8 bag / inner box size : l x w x h 33.5cm x 19cm x 7.5cm 1.1000 pcs / bag packing specification
test report no. canec0904450201 date: 27 aug 2009 page 1 of 7
test report no. canec0904450201 date: 27 aug 2009 page 2 of 7 cadmium (cd) n.d. mg/kg 2 iec 62321:2008, icp-oes lead (pb) n.d. mg/kg 2 iec 62321:2008, icp-oes mercury (hg) n.d. mg/kg 2 iec 62321:2008, icp-oes hexavalent chromium (crvi) by alkaline extraction n.d. mg/kg 2 iec 62321:2008, uv-vis note: 1. mg/kg = ppm 2. n.d. = not detected (< mdl) 3. mdl = method detection limit test method (reference) mdl result unit test item(s) halogen fluorine (f) mg/kg bs en 14582:2007, ic n.d. 50 chlorine (cl) mg/kg bs en 14582:2007, ic 650 50 bromine (br) mg/kg bs en 14582:2007, ic n.d. 50 iodine (l) mg/kg bs en 14582:2007, ic n.d. 50 note: 1. mg/kg = ppm 2. n.d. = not detected (< mdl) 3. mdl = method detection limit test method (reference) mdl result unit test item(s) flame retardants sum of pbbs mg/kg - n.d. - monobromobiphenyl mg/kg iec 62321:2008, gc-ms n.d. 5 dibromobiphenyl mg/kg iec 62321:2008, gc-ms n.d. 5 tribromobiphenyl mg/kg iec 62321:2008, gc-ms n.d. 5 tetrabromobiphenyl mg/kg iec 62321:2008, gc-ms n.d. 5 pentabromobiphenyl mg/kg iec 62321:2008, gc-ms n.d. 5 hexabromobiphenyl mg/kg iec 62321:2008, gc-ms n.d. 5
test report no. canec0904450201 date: 27 aug 2009 page 3 of 7 heptabromobiphenyl mg/kg iec 62321:2008, gc-ms n.d. 5 octabromobiphenyl mg/kg iec 62321:2008, gc-ms n.d. 5 nonabromobiphenyl mg/kg iec 62321:2008, gc-ms n.d. 5 decabromobiphenyl mg/kg iec 62321:2008, gc-ms n.d. 5 sum of pbdes mg/kg - n.d. - monobromodiphenyl ether mg/kg iec 62321:2008, gc-ms n.d. 5 dibromodiphenyl ether mg/kg iec 62321:2008, gc-ms n.d. 5 tribromodiphenyl ether mg/kg iec 62321:2008, gc-ms n.d. 5 tetrabromodiphenyl ether mg/kg iec 62321:2008, gc-ms n.d. 5 pentabromodiphenyl ether mg/kg iec 62321:2008, gc-ms n.d. 5 hexabromodiphenyl ether mg/kg iec 62321:2008, gc-ms n.d. 5 heptabromodiphenyl ether mg/kg iec 62321:2008, gc-ms n.d. 5 octabromodiphenyl ether mg/kg iec 62321:2008, gc-ms n.d. 5 nonabromodiphenyl ether mg/kg iec 62321:2008, gc-ms n.d. 5 decabromodiphenyl ether ## mg/kg iec 62321:2008, gc-ms n.d. 5 note: 1. mg/kg = ppm 2. n.d. = not detected (< mdl) 3. mdl = method detection limit 4. "-" = not regulated 5. ## = the exemption of decabde in polymeric application according 2005/717/ec was overruled by the european court of justice by its decision of 01.04.2008. subsequently decabde is included in the sum of pbde after 01.07.2008 test method (reference) mdl result unit test item(s) pfoa & pfos perfluorooctanoic acid & perfluorooctane sulfonates perfluorooctanoic acid (pfoa) mg/kg epa 3540c: 1996, lc-ms n.d. 10 perfluorooctane sulfonates (pfos) pfos acid pfos metal salt pfos amide mg/kg epa 3540c: 1996, lc-ms n.d. 10 note: 1. mg/kg = ppm 2. n.d. = not detected (< mdl) 3. mdl = method detection limit
test report no. canec0904450201 date: 27 aug 2009 page 4 of 7
test report no. canec0904450201 date: 27 aug 2009 page 5 of 7
test report no. canec0904450201 date: 27 aug 2009 page 6 of 7
test report no. canec0904450201 date: 27 aug 2009 page 7 of 7 sample photo: canec0904450201 can09-044502.001 sgs authenticate the photo on original report only *** end of report ***

▲Up To Search▲

Price & Availability of LH2040-PF

	To Download LH2040-PF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .